How Much Does a Switchboard Upgrade Cost in Sydney?
Here's the short answer. These are Braytech's current indicative prices for residential switchboard upgrades in Sydney, including GST.
Single-phase switchboard upgrade
$2,750–$4,950
Including GST
A straightforward single-phase upgrade starts from approximately $2,750 including GST, depending on the number of circuits and the existing installation.
Three-phase switchboard upgrade
$5,500–$11,000
Including GST
Three-phase boards carry more circuits and protective devices, and are more often combined with supply or metering work.
Indicative Braytech pricing. Final costs depend on the installation and agreed scope of work. A detailed quotation is provided before approved work begins.
These are indicative ranges, not guaranteed fixed prices for every property. The final quotation depends on the existing installation, the number of circuits, the condition of the switchboard, the protective devices required and any additional supply work. A professional assessment is needed to work out exactly what your home requires.
Why switchboard upgrade prices vary
Two homes on the same street can need very different work. The table below explains the main factors that move the price up or down.
| Cost factor | Why it matters |
|---|---|
| Number of circuits | Each circuit needs its own protective device. More circuits means more RCBOs or breakers, more terminations and more testing. |
| Existing switchboard enclosure | Some enclosures can be reused or modified. Others are too small, damaged or unsuitable and need replacing. |
| Condition of existing wiring | Deteriorated or faulty cabling may need fault finding or repair before circuits can be safely reconnected. |
| Single-phase or three-phase supply | Three-phase boards are larger and carry more devices, so they cost more to supply and install. |
| Earthing arrangements | The earthing system is checked during the upgrade. Missing or inadequate earthing must be rectified. |
| Location and accessibility | A board in a tight cupboard, upper level or awkward external position can take longer to work on safely. |
| Metering requirements | Some upgrades need meter relocation or changes that must meet the network's metering requirements. |
| Consumer mains | If the cable from the point of supply to the board is undersized or deteriorated, it may need replacing. |
| Level 2 ASP work | Work on the supply side, such as disconnection, reconnection or service changes, requires an accredited Level 2 electrician. |
| Existing electrical defects | Defects found during assessment or testing need to be addressed for the installation to be safe and compliant. |
| Additional safety equipment | Surge protection, extra circuits or other devices you choose to add will change the scope. |
What Is a Switchboard Upgrade?
Your switchboard is the control centre of your home's electrical system. Power arrives from the street, passes through your meter and into the switchboard, where it's divided into separate circuits for lights, power points, the oven, hot water, air conditioning and so on.
Each circuit is protected by a device that switches it off when something goes wrong. The switchboard is where those protective devices live, which is why its condition matters so much for safety.
A switchboard upgrade replaces or modifies some or all of that equipment. Depending on the home, an upgrade may involve the switchboard enclosure, circuit breakers, safety switches, RCBOs, the main switch, internal components such as neutral and earth bars, and associated equipment where required.
A modern board offers improved circuit protection, capacity that suits how the home is used today and clear labelling of every circuit. That said, not every older switchboard automatically needs replacing. The existing installation needs to be assessed first, and sometimes a targeted repair or modification is the right answer.
Older fuse board
- Rewireable ceramic fuses
- Little or no shock protection
- Faded or missing labels
- No room for new circuits
Modern switchboard
- Resettable protective devices
- Residual-current protection on circuits
- Every circuit labelled
- Spare capacity where practical
10 Signs Your Home May Need a Switchboard Upgrade
These are the things our electricians look for. Not every one automatically means a full replacement, but each is a good reason to have your board assessed by a licensed electrician, who can find the cause and recommend the right work.
- 01
Older porcelain or ceramic fuses
Rewireable ceramic fuses were standard in many Sydney homes for decades. They protect wiring from overcurrent, but boards fitted with them usually have little or no residual-current protection, and replacing fuse wire relies on the right rating being used.
- 02
Missing or inadequate safety switch protection
If your board has no safety switches, or they only cover some circuits, people in the home have less protection against electric shock than a modern installation provides.
- 03
Visible signs of overheating or damage
Discolouration, scorch marks, melted plastic, a burning smell, buzzing or crackling can point to loose connections or failing components. Treat these as urgent and have the board checked promptly.
- 04
Repeated electrical protection trips
Frequent tripping can be caused by an overloaded circuit, a faulty appliance, damaged wiring or a failing device. The cause needs to be found. Sometimes the fix is a repair, not a new board.
- 05
Deteriorating switchboard components
Brittle insulation, cracked fuse holders, corroded terminals or loose mounting all reduce the reliability of the protective equipment.
- 06
Insufficient capacity for additional circuits
If there is no room to add a circuit for a renovation, new kitchen or extension, the board may need modifying or replacing.
- 07
Planned high-demand appliances
Induction cooktops, ducted air conditioning and other large loads usually need dedicated circuits and suitable protection.
- 08
Planned solar, battery or EV charging upgrades
These systems connect at or near the switchboard. The board, and the supply capacity behind it, should be assessed before installation.
- 09
Existing electrical defects
A defect notice, a failed inspection or faults identified by another electrician may require switchboard work to rectify.
- 10
An installation that no longer suits the home
Homes change. A board that served a smaller household decades ago may not suit how the home is used today.
If your switchboard is smoking, sparking or on fire
Stay clear of the switchboard and seek urgent professional or emergency help. In a life-threatening emergency, call 000. Don't attempt to repair electrical equipment yourself.
Old Ceramic Fuse Boards vs Modern Electrical Switchboards
Traditional porcelain fuses do provide overcurrent protection. When too much current flows, the fuse wire melts and the circuit disconnects. What they don't provide is residual-current protection, the type of protection used to reduce the risk of electric shock. Here's how the two compare.
Overcurrent protection
Shock (residual-current) protection
Fault isolation
Circuit identification
Enclosure
Capacity
Maintenance and inspection
Are Old Ceramic Fuse Boards Dangerous?
An old fuse board isn't automatically dangerous, but older installations can carry risks that build up over time:
- Ageing equipment that is reaching the end of its service life.
- Deteriorating insulation on cables and components.
- Inadequate or missing RCD (safety switch) protection.
- Overheating or damaged connections.
- Unsuitable modifications made over the years.
- Existing wiring defects elsewhere in the home.
Older switchboards and asbestos
Some older switchboards were mounted on backing boards that may contain asbestos. Not all old switchboards do. If your board is old, don't drill, cut, sand or try to remove it. Suspected asbestos must be appropriately assessed and managed by qualified professionals, and any handling it requires is built into the scope and quotation for the job. See the Asbestos NSW guidance on electrical backing boards.
What's the Difference Between a Circuit Breaker, Safety Switch and RCBO?
These three devices are the heart of a modern switchboard. They protect against different things, so it's worth understanding what each does.
Circuit breaker
Protects the wiring
Provides overcurrent protection. It switches the circuit off during an overload (too many appliances on one circuit) or a short circuit, helping prevent cables from overheating.
Safety switch (RCD)
Protects people
Monitors the current going out and coming back. If it detects certain leakage faults, such as current flowing to earth through a person, it disconnects power very quickly to reduce the risk of electric shock.
RCBO
Does both, per circuit
Combines residual-current and overcurrent protection in a single device for one circuit. Braytech installs individual RCBO protection on applicable circuits as part of our standard upgrade approach.
Why individual RCBO protection is worth having
On older boards with one or two safety switches, several circuits share each device. A fault on one circuit, say a faulty outdoor light, can switch off a whole group, including the fridge. With an RCBO on each circuit, a fault usually trips only that circuit. The rest of the house stays on, and it's much easier to tell where the problem is.
One clarification: RCBOs are not arc fault detection devices (AFDDs). AFDDs are a separate type of device designed to detect dangerous arcing. RCBOs don't provide dedicated arc fault detection.
Not sure what's in your switchboard?
Our licensed electricians can assess it and explain your options with upfront pricing.
What's Included in a Braytech Switchboard Upgrade?
Depending on the existing installation and the agreed scope, a Braytech switchboard upgrade may include:
- New switchboard enclosure
- Main switch
- Individual RCBO protection
- Appropriate circuit breakers
- Neutral and earth arrangements
- Circuit labelling
- Earthing inspection and required rectification
- Electrical testing
- Compliance documentation
- Removal of redundant equipment
- Site clean-up
We use quality electrical products from established manufacturers including Hager, Clipsal and NHP. Reliable equipment and careful workmanship matter more on a switchboard than almost anywhere else in the home.
Do All Switchboard Upgrades Include the Same Work?
No. The exact scope depends on the property. Some homes need a complete new board and earthing work; others need less. Where more than one safe, compliant approach is available, we'll set out the options so you can choose what suits your needs and budget. Our electricians explain each option and provide upfront pricing before work proceeds. Not every home needs the most expensive solution.
What Happens During a Switchboard Upgrade?
Here's how a Braytech switchboard upgrade works, from first call to handover.
- 1
Step 1: Initial enquiry
You contact Braytech to talk through your concerns or the upgrade you have in mind.
- 2
Step 2: Electrical assessment
A Braytech electrician attends and assesses the existing switchboard and the relevant parts of your electrical installation.
- 3
Step 3: Options and upfront pricing
We explain the available options and provide upfront quotations, so you can make an informed decision before anything proceeds.
- 4
Step 4: Scheduling and preparation
The work is organised around the scope, availability and any supply coordination needed. Where circumstances permit, suitable upgrades may be completed on the same day.
- 5
Step 5: Installation
Our licensed electricians complete the agreed work. Power generally needs to be disconnected during parts of the installation.
- 6
Step 6: Testing and compliance
The installation is tested, and the relevant compliance documentation is completed.
- 7
Step 7: Customer handover
Your electrician explains the completed work, the new protective devices and anything else you should know about your board.
How Long Does a Switchboard Upgrade Take?
Braytech generally allows approximately 4–12 hours for a residential switchboard upgrade, depending on the complexity of the installation. We recommend allowing a full day when planning around an upgrade, as power may be unavailable for a significant portion of it.
We'd rather set realistic expectations and allow enough time to do the job properly than rush the testing at the end of the day.
How Should Homeowners Prepare?
- Plan for a temporary electricity interruption, and charge phones and laptops beforehand.
- Switch off appliances as appropriate before the work starts.
- Keep fridge and freezer doors closed during the outage.
- Make sure there is clear access to the switchboard and meter area.
- Make arrangements for any equipment that needs continuous power, including medical equipment.
- Discuss any special requirements with Braytech before the installation day.
Do I Need to Be Home?
You don't necessarily need to stay at the property for the whole installation. Access, any approvals, how we'll contact you during the day and the handover should all be confirmed beforehand, so the work can go ahead smoothly and you get a proper explanation of the new board at the end.
What Happens if an Existing Wiring Fault Is Discovered?
Some older Sydney homes still contain ageing cabling, including VIR (vulcanised Indian rubber) insulated wiring. Depending on its condition, older wiring can have deteriorated insulation or other defects. Not every older home has VIR wiring, and an upgrade doesn't create wiring faults, but modern RCBO protection is more sensitive than old fuses and can reveal faults that were previously undetected.
When that happens, additional fault finding or rectification may be needed before the affected circuit can be safely reconnected.
Braytech's approach
We provide upfront quotations for the agreed work. If a previously unidentified issue is discovered during an upgrade, your electrician explains what was found, discusses the options and obtains your approval before undertaking any additional chargeable work. Our priority is that you understand what's happening and why.
Do I Need a Level 2 Electrician for a Switchboard Upgrade?
Not every switchboard upgrade involves Level 2 work. However, some projects involve the electricity supply equipment or network connection, which in NSW must be carried out by an Accredited Service Provider (ASP) Level 2 electrician. Examples include:
- Consumer mains replacement.
- Supply disconnection or reconnection.
- Alterations to service connections.
- Changes to service protection arrangements.
- Three-phase supply upgrades.
- Certain metering and network requirements.
Braytech holds Level 2 ASP authorisations across the Ausgrid, Endeavour Energy and Essential Energy networks. Where applicable, our team can coordinate the authorised supply work and relevant applications as part of the agreed project. Learn more about our Level 2 electrical services.
What's the Difference Between a Switchboard Upgrade and a Supply Upgrade?
A switchboard upgrade changes or improves the equipment that distributes and protects electricity inside your property. A supply upgrade changes the supply arrangements or the capacity available to the property, for example moving from single-phase to three-phase or upgrading the consumer mains. Some homes need both, depending on their electrical requirements.
Should I Upgrade My Switchboard Before Installing Solar or an EV Charger?
New equipment can add significant demand to your electrical system. Before installing any of the following, it's worth having your switchboard and available supply capacity assessed:
- EV chargers.
- Solar systems.
- Home batteries.
- Induction cooktops.
- Additional air conditioning.
- Other high-demand appliances.
A switchboard upgrade isn't automatically required for every installation. The right solution depends on your existing system and the equipment you're planning. See our EV charger installation page for more.
Do I Need Three-Phase Power?
Most Sydney homes have single-phase power: one active conductor supplying the whole house. Three-phase supply uses three active conductors, which spreads load across phases and makes more capacity available. It can suit larger homes with heavy loads, such as large ducted air conditioning, some workshop equipment or higher-powered charging.
Three-phase supply is not automatically required for a home EV charger. Many home chargers run on single-phase power. Whether three-phase makes sense depends on your loads, your plans and what the network can supply. Read about our three-phase power upgrades.
Can We Allow for Future Electrical Circuits?
Yes. When recommending switchboard options, Braytech considers suitable spare capacity and your likely future requirements. Keep in mind that whether future additions are suitable also depends on the property's overall supply capacity, not just space in the board.
What Should You Look for in a Switchboard Upgrade Quote?
Use this checklist when comparing quotations:
- 1.What equipment is included?
- 2.Does the quotation include suitable circuit protection?
- 3.Is a new enclosure required?
- 4.Is electrical testing included?
- 5.Are earthing requirements addressed?
- 6.Is any supply work necessary?
- 7.Does the quote include relevant compliance documentation?
- 8.What warranties apply?
- 9.How long will installation take?
- 10.Could additional work be required?
- 11.Is the electrician appropriately licensed and authorised?
- 12.Is the price GST-inclusive?
Two quotes for the same board can differ significantly. One may include individual RCBOs, a new enclosure, earthing rectification and full testing; another may cover less, or exclude items that turn out to be necessary. Price alone doesn't tell you about quality or scope, so compare what's actually included.
Braytech's approach
We believe homeowners should understand their options before making a decision. We assess the installation, explain the proposed work and provide upfront pricing so you can choose an appropriate solution.
Why Sydney Homeowners Choose Braytech
Local, family-owned business
Braytech is based in Caringbah in the Sutherland Shire and provides residential electrical services throughout our Sydney service areas.
Licensed electricians
Our electrical work is completed by appropriately licensed electricians.
Level 2 ASP capabilities
We can manage applicable authorised supply-related work when a project needs Level 2 expertise.
Upfront pricing and clear options
We provide quotations before approved work begins and explain the options available to you.
Quality electrical equipment
We use established brands including Hager, Clipsal and NHP.
Lifetime labour warranty
We stand behind our workmanship with our lifetime labour warranty, subject to the applicable warranty terms.
Braytech was awarded Outstanding Service & Trade at the 2026 Sutherland Shire Business Awards.
Our Commitment Doesn't End When the Job Is Finished
At Braytech Electrical, we take pride in the quality of our workmanship. Our switchboard upgrades are supported by our lifetime labour warranty, giving you added confidence in the work completed by our team.
We use established equipment manufacturers and carry out the required testing before handing over an installation. Our labour warranty covers our workmanship; the equipment itself is covered separately by each manufacturer's own warranty.
Warranty terms
Our lifetime labour warranty is subject to the applicable written warranty terms. Ask us for a copy with your quotation.
Frequently Asked Questions About Switchboard Upgrades
How much does a switchboard upgrade cost in Sydney?
Braytech's indicative pricing is $2,750–$4,950 including GST for a single-phase residential switchboard upgrade, and $5,500–$11,000 including GST for a three-phase upgrade. The final price depends on the number of circuits, the condition of the existing installation, earthing, access and whether supply or Level 2 work is needed. We assess the property and provide a detailed quotation before approved work begins.
Are Braytech's prices inclusive of GST?
Yes. The pricing ranges in this guide and our quotations for homeowners are shown including GST, so the figure you see is the figure you compare.
How do I know if my switchboard needs upgrading?
Common signs include ceramic fuses, missing safety switches, scorch marks or burning smells, frequent tripping, no room for new circuits, or plans for solar, batteries, an EV charger or large appliances. None of these automatically means a full replacement. A licensed electrician needs to assess the board and the cause of any problem before recommending work.
Are old ceramic fuse boxes dangerous?
Ceramic fuses still provide overcurrent protection, but older fuse boards usually lack residual-current protection, which is what reduces the risk of electric shock. Ageing components, deteriorated insulation, loose connections and unsuitable past modifications can add further risk. An assessment tells you how your particular board is performing.
Do all older switchboards need replacement?
No. Some older boards can be improved by adding safety switches, repairing components or making targeted modifications. Others are better replaced. The right answer depends on the condition of the board, the enclosure, the wiring and what the home needs. We explain the safe, compliant options and their prices so you can choose.
How long does a switchboard upgrade take?
Braytech generally allows approximately 4–12 hours for a residential switchboard upgrade, depending on complexity. We recommend planning for a full day, as power may be off for a significant part of it.
Will my electricity be disconnected?
Yes, for parts of the job. Power generally needs to be isolated while the old equipment is removed and the new board is installed and tested. We'll tell you beforehand what to expect so you can plan around it.
Do I need to be home during the installation?
Not necessarily for the whole day. Access, approvals, communication and the handover should be arranged beforehand. Many homeowners are present at the start and for the handover at the end, when the electrician explains the new board.
Can Braytech complete a switchboard upgrade on the same day?
Sometimes. Where the scope is straightforward, materials are available and no supply coordination is needed, a suitable upgrade may be completed on the same day. Jobs that need network applications or Level 2 supply work usually need to be scheduled.
What is an RCBO?
An RCBO (residual current breaker with overcurrent protection) combines a safety switch and a circuit breaker in one device. It protects a single circuit against overloads, short circuits and certain earth leakage faults. Braytech installs individual RCBOs on applicable circuits as part of our standard upgrade approach, so a fault on one circuit is less likely to switch off others.
What's the difference between a circuit breaker and a safety switch?
A circuit breaker protects wiring by disconnecting power when too much current flows, such as during an overload or short circuit. A safety switch (RCD) monitors for current leaking to earth, which can happen when electricity passes through a person, and disconnects power very quickly to reduce the risk of electric shock. They protect against different things, and a modern board uses both, or RCBOs that do both.
Will a switchboard upgrade stop my power from tripping?
Not always. Tripping is a symptom. If it's caused by a worn-out device, a new board may solve it. If it's caused by a faulty appliance, damaged wiring or moisture, the new protection will keep tripping until that fault is found and fixed. Modern RCBO protection can also reveal faults an older board didn't detect.
What happens if existing wiring faults are discovered?
Our electrician explains what was found, discusses the options and obtains your approval before undertaking any additional chargeable work. This can happen in older homes where cabling such as VIR (vulcanised Indian rubber) wiring has deteriorated, and new protection highlights faults that were previously undetected.
Can an older switchboard contain asbestos?
Some can. Certain older switchboards were mounted on backing boards that may contain asbestos. Not every old board does. Do not drill, cut, sand or remove a suspected board yourself. Suspected asbestos must be assessed and managed by appropriately qualified professionals, and this is factored into the scope and quotation.
Do I need a Level 2 electrician?
Not for every switchboard upgrade. You need an accredited Level 2 electrician when the job involves network-side work, such as consumer mains replacement, supply disconnection or reconnection, service connection changes, service protection changes, three-phase supply upgrades or certain metering requirements. Braytech holds Level 2 ASP authorisations across the Ausgrid, Endeavour Energy and Essential Energy networks.
Can I upgrade from single-phase to three-phase?
Often, yes, but it depends on what the local network can supply to your property. A three-phase upgrade involves an application to the network, Level 2 supply work and usually a three-phase switchboard. We can assess whether it's needed for your plans and coordinate the applications as part of the agreed project.
Do I need an upgrade before installing an EV charger?
Not always. Many home EV chargers run on single-phase power. Whether your board needs work depends on available space, existing protection and your supply capacity. We assess the board and supply before recommending a charger setup.
Can a switchboard upgrade improve my home's energy efficiency?
Not directly. A switchboard distributes and protects power; it doesn't reduce how much electricity your appliances use. An upgrade can, however, make it easier to add efficient equipment such as solar, batteries, heat pumps or induction cooking, and clear circuit labelling helps you understand your home's electrical layout.
What compliance documentation should I receive?
In NSW, licensed electricians must complete a Certificate of Compliance for Electrical Work (CCEW) for electrical installation work and provide a copy to the customer. Where supply work is involved, network notifications are also completed. Keep your CCEW with your property records.
What warranty does Braytech provide?
Braytech offers a lifetime labour warranty on its workmanship, subject to the applicable written warranty terms. This is separate from the manufacturers' warranties on the equipment installed, which are set by each manufacturer. Ask us for a copy of the warranty terms with your quotation.
If you'd like to discuss available payment options for your switchboard upgrade, our team is happy to talk you through them.
About this guide
Written by Braytech Electrical Pty Ltd
Technical review: Braden Williams, Founder & Director, Braytech Electrical Pty Ltd, Level 2 ASP. Review pending.
Published 17 November 2026 · Last reviewed pending
This guide provides general information only. Every electrical installation is different and needs to be assessed by a licensed electrician. Pricing is indicative and subject to a site assessment and written quotation.

